Pages

Measuring pressure

A device to measure pressure is called a manometer. A device which measures atmospheric pressure is called a barometer. The simplest design for these is a column of mercury in a beaker:


When the atmospheric pressure is increase, force is applied on the mercury, pushing it up the column. Mechanical equilibrium is reached when this force is balanced by both increased pressure inside the column, and weight of the mercury inside the column.

If the column contains a vacuum, then the increased atmospheric pressure is balanced purely by the weight of the mercury.

Pressure is force divided by area. The weight of the lifted mercury is mg, so the pressure on the base of the column is this weight divided by cross-sectional area. This has to match the increase in atmospheric pressure for the system to be at equilibrium:

Pressure = mg / A

Since mass is volume*density:


Notice that pressure is independent of the cross-sectional area of the cylinder.

A more advanced solution is to use a curved tube:



The change in pressure is directly proportional to the difference in height of the two columns. A different of 1 mm corresponds to 1 mm Hg, also known as one torr.

The reason mercury is used is because of its low vapor pressure. Using a liquid like water would mean having to account for more vapor pressure in the sealed part of the tube - but it can be done.

Ethylene glycol

One of the most common acetal formation reactions you see in organic synthesis is the use of ethylene glycol. It is widely used as automotive antifreeze. A sweet-tasting, colorless, odourless liquid, which will kill pets or humans if they drink enough of it.


The TsOH is para-Toluenesulfonic acid. It is as strong as sulphuric acid, but exists as a stable white solid which makes it convenient to use. It is also non-oxidizing. And it dissolves in organic solvents.

Mechanism:


Don't miss out the formation of the oxonium ion.

A  five-membered cyclic acetal is known as a dioxolane, as created in this example.

This forms readily even from ketones. 6-ring diols work too. I don't know why ethylene glycol is more common, presumably it is cheaper to make.

An example of the use of this protecting group is below:


The reaction works if we first protect the carbonyl. Since acetals are stable to a base (cyclic acetals moreso), the grignard reagent will only attack the Br. Once we have used the Grignard reagent to attack an electrophile, we can then hydrolyse the acetal off using acid and water.

Notice that water needs to be distilled off for the protecting group to be fully added. Thankfully, ethylene glycol has a boiling point of 197 C. If the reactants or solvent had a boiling point lower than water, then we could remove water using a Dean Stark Head with benzene.

Guide to symmetry

Symmetry symbols are a way to describe different shapes, molecules in our case, by categorizing them based on mathmatical properties, such as how many mirror planes a shape has. You've already seen two of them, sigma-symmetry ("cylindrical symmetry around the internuclear axis") and pi symmetry ("above and below").

In certain specialist fields such as crystallography, learning these notations can be really useful. For most chemistry undergraduates these are boring and without much use. But you will be tested on them. You are also likely to come across one or two annoying teachers who describe the shapes of molecules by symmetry notation, even when words like "octahedral" or "tetrahedral" refer to the same thing.

Symmetry operation: An action, such as rotation through a certain angle, which leaves the molecule apparently unchanged.

Symmetry element: A point, line, or plane, in which the symmetry operation is performed in respect to.

Different symmetry operations are described below.

N-fold rotation (Cn)


Example, the rotation of H2O:


The symmetry operation above is rotation of 180°. The symmetry element is the vertical line through the center of the molecule, called the n-fold rotational axis.

As you can see, the molecule is apparently unchanged. The central atom is considered not to be moved at all. All symmetry operations leave at least one point unmoved (the center of the molecule) which is why they are sometimes called operations of point group symmetry.

The C2 symbol in the diagram is an example of an n-fold rotation symmetry operation, with the general formula Cn. This is an operation if the molecule appears unchanged after rotation by 360 / n degrees. So you can find n by dividing 360° by the angle the structure must be rotated. Easiest way to understand it is by diagrams:


The subscript describes the angle, the superscript describes how many rotations of that angle are done in the symmetry operation.

Many molecules have multiple n-fold rotational axes which exams will ask you to spot. Xenon tetrafluroride for example:


By convention, the highest order n-fold axis is set as the Z axis, and is typically drawn vertically.

You might reason that C1, C22, C33, and many others are all symmetry operations. This is correct. But there is no point mentioning them since anything rotated by 360 degrees is symmetrical, so writing it doesn't help us distinguish the molecule.

The one exception to this attitude is the next operation:

Identity operation (E)

This consists of doing nothing to the molecule. They all have at least this operation, and some have only this operation.

I don't know why people go through the effort of writing this. I doubt many undergrads know either. But it is important because many exams will ask you to describe symmetry elements in a molecule, and simply writing "E" can get you a mark.

My textbook describes the symmetry element of E as being "the whole of space". Presumably there is mathematical justification for that.

Reflection (σ)

This operation simply describes mirror planes, denoted with a sigma symbol σ. Water has two σv planes:


The subscript v or h refers to whether the planes are vertical or horizontal in respect to the principle axis of rotation - the axis with the highest number of turns.

For XeF4:


The d in σd means "dihedral", refering to the fact that it intercepts two axes of rotation. Presumably this is just a way to distinguish it from σd - the plane which intercepts fluorine atoms.

Inversion (i)

To see this we imagine a point in the molecule, move it towards the center of the molecule, then move it outwards from the center the same distance. If the molecule appears unchanged at all points, it contains i symmetry.

This can be shown well with an octahedral shape:


In this case, the shape would only have inversion symmetry if all atoms were the same, or if 1 6, 3 and 5, 6 and 1, were equal to eachother. Tetrahedral shapes never have inversion symmetry.

Below is an ethene-shaped molecule, inversion is compared with a 2-fold rotation:


Improper rotation (S)

This is the most difficult to learn and to relearn, and probably often skipped in an exam question asking you to identify symmetry elements.

It involves rotation around a n-fold axis followed by reflection in the plane perpendicular to that axis:


The example above uses a 90 degrees rotation - equivalent to a 4-fold axis, so we denote this in subscript as S4

A rotation of 360 degrees followed by reflection is equivalent to reflection alone, so we do not bother using S1 since we can use σ.

A rotation of 180 followed by reflection is equivalent to inversion. So we do not use S2 either, since we can use i.

Kinetics

A chemical reaction proceeds if the change in Gibbs energy is negative. But what determines how fast the reaction happens?

The answer depends on the mechanism. For example:


The mechanism here is just a proton colliding with a water molecule. So can predict intuitively that the reaction rate is proportional to the concentrations of each component, because higher concentrations increase the chance of a collision. Experiments confirm this model.


Not everyone collision results in a reaction. It needs to collide fast enough and at the right angle, for example the proton needs to collide with the oxygen atom in water. These effects are represented by a rate constant k.


Above is a gas phase example, but many reactions in solvents behave similarly, such as protonation of water by HCL:


The reason the collision has to be fast enough is to overcome the activation energy - the energy of the transition state, which is when the new bond is partially formed and the old one is partially broken:




Transition states are just energy maxima, they cannot be isolated because any change in the structure pushes it towards a lower energy state. It would be like balancing a marble on top of a football, without friction.

The rate constant is also the part which varies with temperature.

The rate constant can be related to temperature and the activation energy of the reaction using the Eyring equation:

Pauling's rules

These are two empirical rules which predict the strength of mononuclear oxoacids. I'm not sure why they are so commonly taught to undergrads - since I presume modern wavefunction software could make more advanced predictions.

1. For the oxoacid OpE(OH)q, pKa ≈ 8 – 5p
2. The successive pKa values of polyprotic acids (those with q > 1), increase by 5 units for
each successive proton transfer.

It should be obvious why oxo groups increase acidity, they can delocalize charge on the anion by resonance:


This allows us to rationalize why the acidities of chloro oxoacids decrease in the order HOCl4 > HClO3 > HClO2 > HClO. Likewise for H2SO4 > H2SO3 and HNO3 > HNO2.

One good use of these rules is to notice structural anomalies. For example, if you dissolve carbon dioxide in water to make carbonic acid, you will find an empirical pKa of 6.4 - but the rules predict a pKa of 3.


The mistake is in assuming that all of the CO2 dissolved in a sample of water exists as carbonic acid. In reality, only 1-2% of dissolved carbon dioxide exists in carbonic acid form. The pure pKa is 3.6 when this difference is taken into account.

Many non-metal oxides, and some metal oxides, do not fully become their acidic form when dissolved in water. Deviation from Pauling's rules can help us detect that.

Bronsted acid classes

1. Aqua acid

This is an acidic proton located on a water molecule which is co-ordinated to a metal ion. Example:


2. Hydroxoacid

This is an acidic proton on a hydroxyl (OH) group, which does not have a neighboring oxo group (=O). An example is telluric acid:


Which is a white solid that dissolves in water.

3. Oxoacid

This is an acidic proton on a hydroxyl group, which has a neighboring oxo group. The most common ones are mononuclear, examples:


Often one or more of the OH groups can be replaced with an electron-withdrawing group such as F or CF3, or an electron-donating group such as NH2 - which can donate electrons by pi-resonance. Charge is more stable when spread out, so we can increase acidity by making an anion more stable by delocalizing charge (ie. pulling it off the oxygen atom).


Not all oxoacids follow the simple pattern of one atom surrounded by =O and -OH. For example, phosphonic acid (H3PO3) is only diprotic. Its easy to lose a mark in an exam by forgetting that one of the hydrogens isn't attached to an OH:

Solvent-system definition of acids and bases

This recognizes autoionisation of some aprotic solvents, such as boron trifluoride:


Notice the similarity with autoionisation (ie. autoprotolysis) of water.

In the solvent-system definition, a solute which increases the concentration of the cation generated by autoionisation of the solvent is called an acid, and a solute which increases the concentration of the anion generated by autoionisation of the solvent is called a base.

BrF2AsF6, called Difluorobromine(III) hexafluoroantimonate(V), is a salt without any obvious uses. But it is soluble in BrF3. It disassociates into BrF2+ and AsF6-, hence we would call it an acid.

Another example is dissolving sodium amide in ammonia. The autoionisation equation of ammonia is:


Since sodium amide splits into Na+ and NH2-, we would call it a base.